SHORT DESCRIPTION
Baby monitor with visual noise level monitoring & LED display.
DESCRIPTION
The baby monitor with ECO+ mode is safe and reliable and ready for use right away. The coloured LED display and visual noise level monitoring make the baby monitor the perfect assistant for parents.
- ECO+ mode for low-emission and energy-efficient transmission.
- Coloured LED display.
- 1-way communication.
- Immediately ready for use.
- 120 channels.
- Digital transmission.
- Visual noise level monitoring.
- Range of up to 300 m.
- Range control with acoustic signal.
- 5-level volume adjustment.
- Low battery alarm.
HOW TO USE
- Position the baby unit so that it is in an elevated position and is not in proximity to any other devices that may cause interference.
- Using the mains part plug, connect the baby unit to a socket.
- The device automatically switches on.
- The power LED will light up green.
- To switch the device off press the ON/OFF button for at least 2 seconds or
unplug the mains part. The power LED will go out.
- To switch the device on again press the ON/OFF button for approx. 2 seconds.
- Set up the parent unit in the room where you are going to be
- To ensure optimal safety, the parent unit is designed so that it can
only be operated with batteries inserted.
- The battery must be charged for at least 16 hours before the device can be
first used independently of the mains; you may use the device during this
period.
- Switch the parent unit on by pressing the button for 2 seconds. The power
LED of the parent unit will light up green. The device is active.
- If the parent unit battery is low the unit will beep twice. If the device is not
connected to a socket, it will switch off automatically after a short period. The
power LED will go out.
- Using the mains part plug, connect the parent unit incl. battery to a socket.
- The device automatically switches on. The power LED will light up green.
- If the mains part plug is unplugged the device will switch to battery operation.
- The standby time will depend on the battery charge status. To switch the device off press the button for approx. 2 seconds, the power LED will go out.